Ranger 4WD V6-4.0L VIN E (2001)
6. Connect the clockspring electrical connector at the base of the steering column.
7. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
8. Connect the battery ground cable.
9. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS).
10. Disconnect the battery ground cable and wait at least one minute.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS AND
NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.
1. Disconnect the battery ground cable and wait at least one minute.
2. Remove the restraint system diagnostic tools from the clockspring electrical connectors at the top of the steering column.