ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Fluid Hoses – Power Steering – Replace (13 442 0) > < Fluid Cooler – Power Steering – Remove and Install (13 444 0)

Scorpio 1995 (10.1994-06.1998)

Steering Wheel – Remove and Install (13 524 0)Scorpio 1995 (10/1994-06/1998)
Print Print
Removal and Installation
Remove

WARNING:

When the battery negative lead has been disconnected wait at least 15 minutes before proceeding to avoid the possibility of accidentally firing the air bag.
1. Disconnect the battery negative lead.

2. Raise the vehicle and remove the lower engine shield.

3. Remove the clamp plate bolt securing the flexible coupling to the steering column shaft.
   Rotate the clamp plate to disengage.
4. Lower the vehicle.
5. Remove the air bag module (refer to Operation Number 40 700 0).

6. Centralise the steering wheel and lock in position.

7. Remove the steering wheel.
1. Disconnect the clockspring/horn multiplug.
2. Remove the steering wheel retaining bolt.
• Turn the ignition switch to position one to remove the steering wheel and return to position 0 when removed.
Install
8. Refit the steering wheel.
• Turn the ignition switch to position one to refit the steering wheel and return to position 0 when refitted.
1. Refit the steering wheel retaining bolt.
2. Reconnect the clockspring/horn multiplug.
9. Refit the air bag module (refer to Operation Number 40 700 0).
10. Raise the vehicle.

11. Align the flexible coupling clamp plate over the steering column shaft and secure with a new bolt.
12. Refit the lower engine shield and lower the vehicle.
13. Reconnect the battery negative lead.

Fluid Hoses – Power Steering – Replace (13 442 0) > < Fluid Cooler – Power Steering – Remove and Install (13 444 0)