ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Cushion - Rear Seat - Remove and Install (40 122 0) > < Cover and Pad Assembly - Backrest - Front Seat (High Series) - Remove and Install (40 106 0)

Scorpio 1995 (10.1994-06.1998)

Side Bolster - Rear Seat Backrest - Remove and Install (40 135 0)Scorpio 1995 (10/1994-06/1998)
Print Print
Removal and Installation
Remove
1. Fold the rear seat cushion forwards.

2. Release the inner and outer lower securing tangs.

3. Detach the lower seat belt securing bolt.
4. Fold the rear seat backrest forwards.
5. Remove the rear seat backrest (refer to Operation Number 40 128 0).

6. Remove the rear seat backrest outer retaining bracket (one Torx bolt).

7. Remove the rear seat backrest catch pin.

8. Remove the seat belt guide bezel screws.

9. Remove the upper securing nut.
10. Remove the bolster.
   Feed the seat belt out of the bolster.
Install
11. Refit the components in reverse order.

Cushion - Rear Seat - Remove and Install (40 122 0) > < Cover and Pad Assembly - Backrest - Front Seat (High Series) - Remove and Install (40 106 0)