ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Weatherstrip - Door Aperture - Remove and Install (41 375 0) > < Plate - Door Striker - Remove and Install (41 356 0)
Lid Assembly - Luggage Compartment - Remove (41 714 0)Scorpio 1995 (10/1994-06/1998)
Print Print
Removal and Installation
Remove

1. Disconnect the battery negative lead.

2. Remove the luggage compartment lid trim panel.
1. Two 90 degree twist clips.
2. Nine push clips.

3. Displace the harness hinge shield.
   Push up to displace from the end of the hinge.

4. Using a suitable marker pen, mark the position of the hinges.

5. Displace the luggage compartment lid wiring harness.
   Disconnect and unclip the right ‐ hand side harness multiplugs.

6. Displace the luggage compartment lid wiring harness (Cont'd).
   Disconnect and unclip the left ‐ hand side harness multiplugs.

7. Displace the luggage compartment lid wiring harness (Cont'd).
   Disconnect and unclip the centre harness multiplugs.
8. Withdraw the harness from the luggage compartment lid.

9. With the assistance of another technician, remove the luggage compartment lid.
   Four bolts.
Install

10. Refit the components in reverse order.
   Carefully position the hinges to the markings on the lid before fully tightening the retaining bolts.

Weatherstrip - Door Aperture - Remove and Install (41 375 0) > < Plate - Door Striker - Remove and Install (41 356 0)