Symptom | Possible Sources | Action |
Drift left or right | * Vehicle attitude incorrect (front or rear is high or low). | * CHECK for abnormal loading, spring sag or non-standard springs. |
* Steering gear or linkage worn or damaged. | * CHECK the steering system. REFER to: Steering System (211-00 Steering System - General Information, Diagnosis and Testing). |
* Brake system. | * CHECK the brake system. REFER to: Brake System (206-00 Brake System - General Information, Diagnosis and Testing). |
* Incorrect wheel alignment. | * ADJUST the wheel alignment. REFER to: (204-00 Suspension System - General Information) Specifications (Specifications), Specifications - Convertible (Specifications). |
* Incorrect front crossmember alignment. | * Using the special tool, CHECK the front crossmember alignment. |
* Worn front wheel bearings. | * CHECK the wheel bearings. REFER to: Wheel Bearing Inspection (204-00 Suspension System - General Information, General Procedures). |
* Wheels and tires. | * |
Steering wheel off-center | * Vehicle attitude incorrect (front or rear is high or low). | * CHECK for abnormal loading, spring sag or non-standard springs. |
* Steering gear or linkage worn or damaged. | * CHECK the steering system. REFER to: Steering System (211-00 Steering System - General Information, Diagnosis and Testing). |
* Suspension lower arm ball joint. | * CARRY OUT the Ball Joint Inspection component test in this procedure. |
* Incorrect wheel alignment. | * ADJUST the wheel alignment. REFER to: (204-00 Suspension System - General Information) Specifications (Specifications), Specifications - Convertible (Specifications). |
Tracks incorrectly | * Incorrect front suspension toe, castor or camber angles. | * CHECK the wheel alignment. REFER to: (204-00 Suspension System - General Information) Specifications (Specifications), Specifications - Convertible (Specifications). - INSTALL new suspension components as necessary. |
* Incorrect rear suspension toe or camber angles. | * CHECK the wheel alignment. REFER to: (204-00 Suspension System - General Information) Specifications (Specifications), Specifications - Convertible (Specifications). - INSTALL new suspension components as necessary. |
* Front or rear suspension damage. | * INSTALL new suspension components as necessary. |
Rough ride | * Front strut and spring assemblies. | * CARRY OUT the Strut or Shock Absorber Testing component test in this procedure. * CHECK and INSTALL new suspension components as necessary. REFER to: Front Strut and Spring Assembly (204-01 Front Suspension, Disassembly and Assembly). |
* Front stabilizer bar, connecting links or bushings. | * CHECK and INSTALL new suspension components as necessary. REFER to: Front Stabilizer Bar (204-01 Front Suspension, Removal and Installation). |
* Front suspension lower arm bushings. | * INSTALL a new lower arm. REFER to: Lower Arm (204-01 Front Suspension, Removal and Installation). |
* Rear suspension bushings. | * CHECK and INSTALL new components as necessary. |
* Rear shock absorbers. | * CARRY OUT the Strut or Shock Absorber Testing component test in this procedure. * CHECK and INSTALL new suspension components as necessary. |
Excessive noise | * Front strut and spring assembly or rear shock absorber and spring upper mounting bolts or nuts loose or broken. * Shock absorbers leaking * Shock absorber performance incorrect * Stabilizer bar components * Strut and spring assembly and springs * Springs moving on spring upper or lower seats * Suspension bushings * Lower arm ball joint * Worn front wheel bearings * Wheels and tires | * |
Incorrect tire wear | * Front or rear suspension damage. | * CHECK and INSTALL new suspension components as necessary. |
* Incorrect wheel alignment. | * ADJUST the wheel alignment. REFER to: (204-00 Suspension System - General Information) Specifications (Specifications), Specifications - Convertible (Specifications). |
Vibration | * Damaged or worn front wheel bearings. | * CHECK the front wheel bearings. REFER to: Wheel Bearing Inspection (204-00 Suspension System - General Information, General Procedures). |
* Wheels and tires. | * CHECK the tires. BALANCE or INSTALL new tires as necessary. |
* Incorrect wheel alignment. | * ADJUST the wheel alignment. REFER to: (204-00 Suspension System - General Information) Specifications (Specifications), Specifications - Convertible (Specifications). |
* Steering gear or linkage worn or damaged. | * CHECK the steering system. REFER to: Steering System (211-00 Steering System - General Information, Diagnosis and Testing). |
* Front strut and spring assemblies. | * CARRY OUT the Strut or Shock Absorber Testing component test in this procedure. * CHECK and INSTALL new suspension components as necessary. REFER to: Front Strut and Spring Assembly (204-01 Front Suspension, Disassembly and Assembly). |
* Damaged front suspension lower arm(s). | * INSTALL a new lower arm(s). REFER to: Lower Arm (204-01 Front Suspension, Removal and Installation). |