ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Heater Core Replace (With Automatic A/C)|Page 8325 > < Heater Core Replace (With Automatic A/C)|Page 8323
Page 4
background image

13.

Using glove compartment and steering column openings for access, disconnect electrical connections, vacuum hoses, heater and A/C (if equipped)
control cables and radio antenna cable.

14.

Remove two lower instrument panel-to-cowl side retaining screws both both sides of instrument panel.

15.

Disconnect under hood connectors from main wiring harness. Disengage main harness rubber grommet from dash panel, then feed wiring harness
and its connector halves into instrument panel area.

16.

Remove two instrument panel brace attaching screws located near bottom of radio.

17.

Snap out left and right front speaker opening covers, then remove upper instrument panel attaching screws.

18.

Remove instrument panel and lay it on front seat.

REMOVE HEATER CASE

19.

Remove instrument panel to heater case shake brace attaching screw, then the instrument panel shake brace.

20.

Remove floor register or rear seat adapter to heater case attaching bolts, then the floor register.

Heater Case Assembly

21.

Remove three (3) heater case-to-dash panel attaching nuts located in engine compartment.

22.

Remove two (2) screws attaching top brackets to cowl top panel, then carefully pull heater assembly from dash panel and remove from vehicle.

Heater Core Replace (With Automatic A/C)|Page 8325 > < Heater Core Replace (With Automatic A/C)|Page 8323