Taurus V6-182 3.0L (1987)
Crankshaft Main Bearing Seal: Customer Interest
Rear Crankshaft Seal - Oil Leaks
LEAKS - OIL - CRANKSHAFT REAR SEAL - 3.0L - BROKEN MAIN BEARING CAP BOLTS
Article No. 88-25-11
FORD:
1987-88 TAURUS
LINCOLN-MERCURY: 1987-88 SABLE
LIGHT TRUCK:
1987-88 AEROSTAR
This TSB article is being republished in its entirety to increase the Service Labor Time standard allowance.
ISSUE:
Oil leaking from the crankshaft rear seal area may be caused by broken rear main bearing cap bolts. A broken bolt will cause oil to leak
through the bearing cap to the block mating surface. (The oil does not leak through the pan seal.)
ACTION:
Remove the oil pan and check the rear main bearing cap bolts for breakage or damage. If the bolts are not broken or damaged, replace the
crankshaft seal and reinstall the oil pan. If rear main bolts are broken or damaged, use the following service procedure and the appropriate
Shop Manual to install new front and rear main bearing cap bolts.
1.
Remove both bolts from the front and rear main bearing caps.
2.
Inspect upper and lower front and rear main bearings for damage or wear. Replace as required.
3.
Replace crankshaft rear seal.
4.
Inspect top of each bolt hole in the front and rear main bearing caps for any ridges which may reduce bolt hole size. Use a file or stone to remove
any ridges.
5.
Thoroughly check top of bolt holes and make sure any sharp edges or burrs are removed with a file or stone.
6.
Replace all four (4) main bearing cap bolts with new bolts (E9DZ-6345-D) and reassemble.
NOTE:
TORQUE THE NEW BOLTS TO 55-63 FT. LBS. (75-86 N-m).
PART NUMBER
PART NAME
CLASS
E9DZ-6345-D
Bolt - Package of 4
B
ARTICLE SUPERSEDED: 87-18-11, 88-2-10, 8/26/87, 1/20/88 88-6-16, 3/16/88
WARRANTY STATUS: Eligible Under Powertrain Warranty Coverage
OPERATION: 882511A
TIME: 7.7 Hrs. - Taurus/Sable
5.3 Hrs. - Aerostar
DLR. CODING:
Basic Part No. 6345
Condition Code: 58
OASIS CODES:
4100, 4104
