Taurus V6-182 3.0L DOHC SHO (1992)
Fuel Pump Relay: Service and Repair
The Fuel Pump relay is located in the Integrated Relay Control Module (IRCM) and is not serviceable separately.
REMOVAL
1.
Remove radiator sight shield.
2.
Disconnect electrical connector.
3.
Remove IRCM assembly located on radiator support.
INSTALLATION
1.
Install integrated relay control module assembly on radiator support.
2.
Connect electrical connector.
3.
Tighten retaining nuts to 36 in lb (4 Nm).
