Taurus V6-182 3.0L DOHC SHO (1992)
The service part number was not changed on the new gasket. When replacing the oil pump gasket the technician must verify that the revised gasket is
being installed. Refer to Figure 1 for proper gasket identification.
It is also important, when servicing a 1991 or 1992 AXODE transaxle, that you check the old pump gasket in the main control. If the old gasket has a
piece missing in the area that is not supported, you must find and remove the broken piece of gasket or it may block the rear lube circuit in the valve
body.
NOTE:
ALWAYS INSTALL NEW GASKETS WHEN SERVICING THE MAIN CONTROL.
