Taurus V6-182 3.0L FF (1995)
Lower Side Moulding / Trim: Technical Service Bulletins
Front Door Moulding - Replacement Procedure
Article No.
94-23-1
11/14/94
MOULDING - FRONT DOOR CLADDING - REPLACEMENT PROCEDURE - SERVICE TIPS
FORD:
1993-95 TAURUS
ISSUE:
The front outside door cladding may break if it is improperly installed.
ACTION:
Refer to the following installation procedure to reduce the chance of improperly installing the moulding and causing damage to the new moulding.
INSTALLATION AND ADJUSTMENT PROCEDURE
1.
Measure the sheet metal gap between the rear edge of the front fender and the front edge of the front door. Adjust the fender or door if the gap is
not between 2.5 mm and 5.5 mm (7/64" and 7/32"). Refer to the appropriate Service Manual for adjustment details.
