Taurus V6-182 3.0L VIN 1 FI Flex Fuel (1997)
6. Lubricate male fitting, green O-ring seals and inside of female fitting with clean Motorcraft YN-12b refrigerant oil or equivalent meeting Ford
specification WSH-M1C231-B.
7. Install plastic indicator ring into cage opening if indicator ring is to be used.
8. Fit female fitting to male fitting and push with a twisting motion until garter spring snaps over flared end of female fitting.
If plastic indicator ring is used, it will snap out of cage opening when coupling is connected to indicate engagement.
9. If indicator ring is not used, check coupling engagement by making sure the garter spring is over flared end of female fitting.
10. Install clip to spring lock coupling.