ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

J1850 Communication Network|Page 4546 > < J1850 Communication Network|Page 4544
Page 1
background image

Information Bus: Description and Operation
ISO 9141 Communication Link

ISO 9141 Communication Link

The ISO 9141 communication link:

^

Consists of a single wire, Circuit 70 (LB/W).

^

Provides a common link for communication to an off-board tester through the Data Link Connector (DLC) located under the instrument panel to
the right of the steering column.

^

Does not allow module-to-module communications. The micro-processor based subsystems included on this network are:
^

Anti-lock brake

^

Supplemental air bag restraints

^

Active anti-theft

^

Keyless entry

^

Windshield wiper

^

Power locks and windows

^

Power steering

^

Interior lighting control

^

Semi-automatic ride control

^

Warning indicator control

Fault Tolerance
The ISO 9141 communication link will fail if any of the following occur:
^

Circuit 70 (LB/W) shorted to ground.

^

Circuit 70 (LB/W) shorted to battery positive voltage (B+).

^

The module loses power or ground supply.

^

A module failure shorts the ISO 9141 communication network internally.

Purpose
The information within this section is designed to diagnose ISO 9141 communication link concerns. These concerns may:

J1850 Communication Network|Page 4546 > < J1850 Communication Network|Page 4544