ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Information Bus|Flow of Diagnosis|Page 4606 > < Information Bus|Flow of Diagnosis|Page 4604
Page 1
background image

Information Bus: Service and Repair

NOTE:  If either Circuit 914 or Circuit 915 is repaired or replaced without following the proper repair procedure, the operation of the J1850
Communication Network will be degraded.

Circuit 914 and 915 must be twisted at a rate of 33-40 twists per meter (3.3 feet) anytime replacement of either circuit is required. The twist must be
within 10 centimeters (4.9 inches) of any connector termination point.

The conductor for Circuit 914 and Circuit 915 must be No. 20 AWG wire.

Information Bus|Flow of Diagnosis|Page 4606 > < Information Bus|Flow of Diagnosis|Page 4604