Taurus V6-182 3.0L VIN 1 FI Flex Fuel (1997)
Steering Gear: Description and Operation
NOTE: The power rack and pinion steering gear is serviced as an assembly. If any service is required, the entire power rack and pinion steering gear
must be replaced.
DESCRIPTION
The power rack and pinion steering gear is a hydraulic-mechanical unit which uses an integral piston and rack design to provide power-assisted
vehicle steering control. The steering gear housing and valve housing are combined into a one-piece aluminum die casting.
^
The gear design incorporates quick connect fittings for the power steering left turn pressure hose and power steering return hose that allow the
lines to swivel when detached from heat shield bracket. This is normal and does not indicate loose fittings.
^
If the fittings leak, check to make sure they are tightened to proper specifications. Do not over-tighten, as this may cause port seat damage.
^
If tightening the fittings to specification does not eliminate the leak, replace the fitting seals.
OPERATION
