Taurus V6-182 3.0L VIN 1 FI Flex Fuel (1997)
4. Remove four accumulator piston shafts.
CAUTION: Do not use any objects in piston shaft bore for removal or damage to bore may result.
NOTE: Identify pistons with respect to the proper bore to aid in reassembly.
5. Remove four accumulator pistons. Remove and discard four seals from pistons.
CAUTION: Use care not to damage machined surfaces or bimetal element.
6. IF NECESSARY, use side cutters supported by a small piece of wood to carefully remove bimetal retaining pin collars. Remove bimetal element
and thermostat plate.
ASSEMBLY