Taurus V6-182 3.0L VIN 1 FI Flex Fuel (1997)
2. Remove three accumulator piston shafts.
3. Using Lock Ring Pliers D81P-77060-A or equivalent, remove three accumulator pistons. Remove seals and O-ring from pistons.
CAUTION: Do not use any objects in piston shaft bore for removal or damage to bore may result.
4. Using side cutters, carefully remove bimetal retaining pin collars and remove bimetal and plate.
CAUTION: Use care not to damage machined case surfaces or bimetallic strips.
5. Pull retaining pins from cover, using Locknut Pin Remover T78P-3504-N.
