Taurus V6-182 3.0L VIN 1 FI Flex Fuel (1997)
14. Remove solenoids:
a. Remove one bolt from EPC solenoid retaining ring, remove EPC solenoid retaining ring and EPC solenoid.
b. Remove one bolt and TCC solenoid.
c. Remove three shift solenoids by depressing tabs, twisting counterclockwise and lifting up.
Assembly
Connector Placement
1. Install solenoids and tighten to 9-12 Nm (80-106 inch lbs.). Refer to the Connector Placements image for proper orientation of shift solenoid
connectors.
Bottom Pump Vane Support Ring
2. Install bottom pump vane support ring.