Taurus V6-182 3.0L VIN 1 FI Flex Fuel (1997)
AX4S Check Balls: Pump Assembly Housing - Check Balls, Oil pump body
13. Install four check balls and one relief valve.
Valve Body Guide Pins And Bolts
14. Position valve body separator plate with bonded gasket on pump housing. Insert Valve Body Guide Pin Set T86P-70100-A and Valve Body Guide
Pin T86P-70100-B. Then, install two Torx(r) bolts. Tighten bolts to 9-12 Nm (80-106 inch lbs.). Remove guide pins.
15. Position main control valve body on pump.
Valve Body Guide Pins
16. Insert Pump Body Guide Pins T86P-70370-A and Valve Body Guide Pin T86P-70100-C.
17. Install two valve body-to-pump retaining bolts and tighten to 9-12 Nm (80-106 inch lbs.). Remove guide pins.
Installation
