Taurus V6-182 3.0L VIN 1 FI Flex Fuel (1997)
4. Install two new O-ring seals.
5. Install forward clutch assembly.
CAUTION: Use caution not to damage the O-ring seals on direct clutch hub.
6. Install No. 6 thrust washer. Be sure oval pegs go into oval holes.
7. Install overdrive drum and one-way clutch assembly. Make sure overdrive drum is fully seated.
8. Turn assembly over and set on overdrive drum.
9. Install No. 10 needle bearing onto intermediate clutch hub using petroleum jelly to hold in place.