ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Drive Axles, Bearings and Joints > < Valve Body, A/T|AX4N|Page 7271
Page 8
background image

12. Lower vehicle.
13. Remove Three Bar Engine Support D88L-6000-A and Engine Lifting Eyes T70P-6000 or equivalents.
14. Connect Transmission Range (TR) sensor and transaxle harness electrical connectors and position engine wire harness.
15. Install battery and battery tray.
16. Connect battery ground cable and positive battery cable.
17. Install Air Cleaner (ACL) assembly.
18. Refill transmission fluid.
19. START engine, move gearshift selector lever through all ranges and inspect for leaks.

Drive Axles, Bearings and Joints > < Valve Body, A/T|AX4N|Page 7271