Taurus V6-195 3.2L DOHC SHO (1994)
15. Install tire and wheel assemblies.
Tighten wheel hub bolt nuts to 115-142 Nm (85-105 ft-lbs.).
16. Remove jackstands and lower vehicle.
17. From inside vehicle, push steering column tube boot end out of vehicle and install over steering gear housing.
18. Install steering column gear input shaft coupling to power steering gear input shaft and control.
Tighten bolt to 41-51 Nm (30-38 ft-lbs.).
19. Install inner steering column tube boot to dash panel.
20. Install steering column gear input shaft coupling to steering gear input worm gear and rack.
21. Fill with Premium Power Steering Fluid E6AZ-19582-AA (ESW-M2C33-F) or equivalent.
22. Bleed power steering system.
23. Check system for leaks and proper operation.
24. Adjust toe setting.