Taurus V6-195 3.2L DOHC SHO (1994)
Torque Converter: Testing and Inspection
Torque Converter Reactor One-Way Clutch Test
TORQUE CONVERTER REACTOR ONE-WAY CLUTCH TEST
Torque Converter One-way Cutch Check
1. With torque converter removed from transaxle, position Holding Wire tool No. T77L-7902-A or T77L-7902-R or equivalent in thrust washer slot.
2. Install one-way clutch torquing tool No. T81P-7902-B or equivalent in reactor spline while holding wire in position.
3. Turn torquing tool counterclockwise using a suitable torque wrench. If torque tool begins to turn before torque wrench reads 10 ft lbs, replace
converter assembly.