Taurus V6-195 3.2L DOHC SHO (1994)
Fig. 7 Inner Race Removal & Installation
10. Rotate inner race up and out of cage.
INSTALLATION
1. Apply light coating of Ford CV joint grease E2FZ-19590-A or equivalent on inner and outer races, then install inner race in bearing cage.
Fig. 10 Inner Race & Cage Assembly
2. Install inner race and cage assembly in outer race.
Fig. 11 CV Joint Assembly Installation Into Outer Race
3. Install CV joint assembly into outer race and pivot 90° into position.
4. Align bearing cage and inner race with outer race, then tilt inner race and install a ball, followed by remaining five balls.