ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Sensors and Switches - Fuel Delivery and Air Induction > < Diagram Information and Instructions|Page 4645
Page 1
background image

Rollover Valve: Locations

Fuel Filter

FUEL FILTER:  The filter is mounted on the underbody next to the RH front corner of the fuel tank.

FUEL INJECTORS:  The injectors are mounted in the lower intake manifold.

FUEL PRESSURE REGULATOR:  The fuel pressure regulator is attached to the fuel supply manifold assembly downstream of the fuel injectors.

FUEL PUMP:  The fuel pump is mounted on the fuel sender assembly inside of the fuel tank.

FUEL TANK VAPOR AND ROLLOVER VALVE ASSEMBLY:  This assembly mounts directly to the fuel tank, using a rubber grommet.

INERTIA SWITCH:  The inertia switch is located in the luggage compartment on the door hinge support above the LH inner wheel house on the sedan
and on the RH rear lower corner pillar reinforcement behind an access door, on the station wagon.

Sensors and Switches - Fuel Delivery and Air Induction > < Diagram Information and Instructions|Page 4645