Taurus V6-3.0L DOHC VIN S (2000)
Antenna: Service and Repair
Cellular Phone Antenna
REMOVAL
1. Disconnect the vehicle cellular phone antenna base cable.
2. Cut the two-way tape holding the vehicle cellular phone antenna base to the glass.
^
Remove the vehicle cellular phone antenna base.
CAUTION: To avoid damage to the glass, do not pry on the vehicle cellular phone antenna base when removing.
INSTALLATION
NOTE: Use a suitable glass cleaner to thoroughly clean the glass and vehicle cellular phone antenna base contact surfaces.
1. Install the two-way tape on the vehicle cellular phone antenna base.
2. Attach the vehicle cellular phone antenna base to the glass.
NOTE: The inside and outside vehicle cellular phone antenna bases must be carefully and accurately aligned with each other.