Taurus V6-3.0L DOHC VIN S (2000)
Rear Bumper Cover / Fascia: Service and Repair
Rear Bumper Cover - Wagon
REAR BUMPER COVER - WAGON
Removal and Installation
1. Remove the load space trim panel.
2. Remove the LH rear bumper cover to rear quarter panel nuts.
3. Remove the RH rear bumper cover panel nuts.
4. Remove the rear bumper cover nuts.
5. Raise and support the vehicle.
6. Remove the four splash shield screws and position the LH and RH splash shields aside to access the rear bumper cover attachment bolts.