Taurus V6-3.0L DOHC VIN S (2000)
CAUTION: When removing the rivet's center pin, use care not to damage the door panel sheet metal.
6. Unclip and disconnect the exterior door handle actuating rod.
CAUTION: When connecting the exterior door handle actuating rod, allow it to hang free before clipping it into place.
7. Remove the rear door latch bolts.
8. Remove the rear door latch, cable and interior handle as an assembly.
^
Disconnect the electrical connector(s).
9. Transfer all the necessary components.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: The special tool must be used to install the new rivet.