Taurus V6-3.0L DOHC VIN S (2000)
Lifter / Lash Adjuster: Service and Repair
Removal and Installation
1. Remove the camshaft followers.
2. Note: Mark the position of the hydraulic lash adjuster to make sure they are assembled in their original position.
Remove the hydraulic lash adjusters.
3. Note: Inspect the hydraulic lash adjusters and install new lash adjusters as necessary.
To install, reverse the removal procedure.
-
Lubricate the hydraulic lash adjusters with Super Premium SAE 5W-30 Motor Oil XO-5W30-QSP or equivalent, meeting Ford specification
WSS-M2C153-G.
