ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Electronic Automatic Temperature Control|Page 7438 > < Heater Core Case|Specifications
Page 1
background image

Heater Core Case: Service and Repair
Electronic Automatic Temperature Control

REMOVAL
1. Remove the instrument panel. Refer to:  Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Removal and

Installation, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Installation

2. Remove the right-side cowl vent screen.

3. Remove the screws and the water shield.

4. Using suitable hose pinching pliers, clamp the heater hoses. Disconnect the heater hoses.

5. Remove the Remote Climate Control (RCC) module.

1

Disconnect the Remote Climate Control (RCC) module electrical connector.

2

Remove the two nuts. Disconnect the vacuum harness.

Electronic Automatic Temperature Control|Page 7438 > < Heater Core Case|Specifications