Taurus V6-3.0L DOHC VIN S (2000)
Plenum Chamber
PLENUM CHAMBER
DISASSEMBLY
1. Remove the plenum chamber. Refer to: Heating and Air Conditioning, Housing Assembly HVAC, Service and Repair, Removal and
Installation, Plenum Chamber, See: Remove and Installation/Plenum Chamber
2. Remove the screws and the plenum demister adapter.
3. Remove the panel/floor door vacuum control motor.
1
Disconnect the vacuum hose.
2
Remove the screws.
3
Rotate and remove the panel/floor door vacuum control motor.
4. Cut the snap-loops around the housing flange of the plenum chamber.
5. Remove the three screws. Separate the plenum chamber.