Taurus V6-3.0L DOHC VIN S (2000)
Throttle Cable/Linkage: Service and Repair
Cable
REMOVAL
1. Disconnect the accelerator cable from the accelerator pedal.
1
Position the accelerator pedal to relieve tension on the accelerator cable.
2
Depress the tabs on the accelerator pedal retaining pin and disconnect the cable.
2. Remove the accelerator cable splash shield.
1
Remove the pin-type retainers.
2
Remove the splash shield.
3. Disconnect the accelerator cable.
1
Move the throttle cam to Wide Open Throttle (WOT).
2
Remove the accelerator cable slug from the throttle cam.
3
Depress the accelerator cable tabs and remove the accelerator cable from the accelerator cable bracket.