ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

General Procedures|Page 7704 > < General Procedures|Page 7702
Page 2
background image

4. WARNING:  Front seat back trim covers installed on seats equipped with side air bags cannot be repaired. They are to be replaced

(cleaning is permissible).

Release the seat back trim cover lower J-clips.

Sable seats

5. CAUTION:  Use care when separating the seat back trim cover from the hook-and-loop strip, or the hook-and-loop strip could be torn

from the seat back foam.

Remove the lower row of hog rings.
1

Reach a hand under the trim cover and separate the hook-and-loop strips.

2

Peel up the seat back trim cover in an inside-out fashion to the lower row of hog rings.

3

Remove the lower row of hog rings.

All seats

6. CAUTION:  Use care when separating the seat back trim cover from the hook-and-loop strip, or the hook-and-loop strip could be torn

from the seat back foam.

NOTE:
-

Taurus has only one row of hog rings.

-

Sable is shown, Taurus is similar.

Peel up the seat back trim cover in an inside-out fashion to the top row of hog rings.
1

Reach a hand under the trim cover and separate the hook-and-loop strips.

2

Peel up the seat back trim cover in an inside-out fashion to the top row of hog rings.

General Procedures|Page 7704 > < General Procedures|Page 7702