Taurus V6-3.0L DOHC VIN S (2000)
17. Remove the diagnostic tool(s) from the driver seat electrical connector(s).
1
Remove the Driver Safety Belt Pretensioner Restraint System Diagnostic Tool from the ten-pin floor electrical connector.
2
Remove the restraint system diagnostic tool from the driver seat side air bag floor electrical connector (if equipped).
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE CAN RESULT IN INJURY AND POSSIBLE VIOLATION OF VEHICLE
SAFETY STANDARDS.
18. Connect the driver seat side air bag (if equipped) and ten-pin electrical connectors.
19. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE CAN RESULT IN INJURY AND POSSIBLE VIOLATION OF VEHICLE
SAFETY STANDARDS.
20. Install the passenger air bag.
