Taurus V6-3.0L DOHC VIN S (2000)
4. Remove the seat back.
1
Position the seat back panels down.
2
Remove the retaining bolts.
3
Lift up and remove the seat back while feeding the safety belt and buckle through the seat back.
5. Remove the safety belt retractor and buckle assembly.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the safety belt retractor and buckle assembly.
6. To install, reverse the removal procedure. See the removal procedure or Specifications for torque specifications.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
7. Check the restraint system for correct operation.