Taurus V6-3.0L DOHC VIN S (2000)
1. Install the safety belt buckle and pretensioner.
1
Position the safety belt buckle and pretensioner onto the seat track bracket.
^
Align the safety belt buckle and pretensioner mounting bracket slot so that the seat track bracket anti-rotation tab goes through it.
2
Install the nut.
NOTE: Make sure to tighten the nut to specification.
2. Route the safety belt buckle and pretensioner electrical connector and wire harness between the seat cushion frame and the seat track.
3. Connect the safety belt buckle and pretensioner electrical connector.
4. Reposition the seat cushion trim cover over the safety belt buckle and pretensioner and attach the J-clips.