Taurus V6-3.0L DOHC VIN S (2000)
Key Reminder Switch: Service and Repair
REMOVAL
1. Remove the ignition switch lock cylinder.
1
Insert the ignition key and turn to the RUN position.
2
Insert a punch in the access hole of the steering column and press the release tab while pulling out the ignition switch lock cylinder.
2. Remove the key in ignition warning switch.
1
Pry the clip down.
2
Push the key in ignition warning switch off the rear of the ignition switch lock cylinder.
INSTALLATION
3. To install, reverse the removal procedure.
^
Verify ignition switch lock cylinder operation.