Taurus V6-3.0L DOHC VIN S (2000)
Ambient Light Sensor: Service and Repair
REMOVAL
1. Remove the defroster grille.
^
Disconnect the sunload/headlamp sensor electrical connector.
NOTE: Lift upwards on the rear edge of the defroster grille then slide rearward to remove.
2. Remove the light sensor amplifier.
1
Disconnect the light sensor amplifier electrical connector.
2
Remove the screws.
3
Remove the sensor.
CAUTION: To avoid damaging the light sensor amplifier electrical connector, carefully tilt the panel to expose the connector without
stretching the wiring.
INSTALLATION
1. To install, reverse the removal procedure.
