Taurus V6-3.0L DOHC VIN S (2000)
5. Using the special tools, disconnect the tie-rod ends.
6. Note: Note the number of times the tie-rod ends turn for assembly reference.
Remove the tie-rod ends.
7. CAUTION: Do not use power tools to remove the nuts. The stabilizer link ball joint or the boot can be damaged.
Note: To remove the nut, first loosen the nut, then use the hex holding feature to prevent the stabilizer bar link ball joint from turning while
removing the ball joint nut.
Remove the nuts and detach both stabilizer bar links. Discard the nuts.
8. Position the boot out of the way.