Taurus V6-3.0L DOHC VIN S (2000)
6.
Tighten the fasteners in the following sequence (see Figure 4):
1.
Stabilizer bar link nuts - 90 Nm (66 lb-ft)
2
Outer-to-inner protective shield bolts - 27 Nm (20 lb-ft)
3.
Torx bolts-to-nut plate - 27 Nm (20 lb-ft)
7.
Install both front wheel and tire assemblies. Tighten the lug nuts to 129 Nm (95 lb-ft).