Taurus V6-3.0L DOHC VIN S (2000)
21. Remove the upper transaxle side pan retaining bolts.
22. Raise the vehicle.
23. Remove the LH wheel and tire.
24. Remove the LH front fender splash shield upper screws.
25. Remove the LH front fender splash shield.
-
Remove one screw, one pushpin and the shield.
26. Remove the LH transaxle support and insulator.
27. For vehicles without the structural side pan, remove the rear engine support bracket.
1
Remove the bolts.
2
Remove the rear engine support bracket.
28. Position a drain pan under the transaxle side pan.
