Taurus V6-3.0L DOHC VIN S (2000)
14. Lift the assembly out of the outer race.
15. Rotate the inner race upward and out of the ball cage.
Assembly
1. Apply a light coat of grease to the inner race, the ball cage, and the outer race.
-
Use Constant Velocity Joint Grease (High Temp.) E43Z-19590-A or equivalent meeting Ford specification ESP-M1C207-A.
2. Install the inner race in the ball cage.
3. Install the inner race and ball cage assembly.
1
Install the assembly vertically, and pivot it 90 degrees into position.