Taurus V6-3.0L DOHC VIN S (2000)
9. Install the front brake anti-lock sensor.
10. Install the front brake anti-lock sensor harness in the clip.
11. Install the wheel and tire assembly.
12. Lower the vehicle.
13. CAUTION: Install and tighten the new front axle wheel hub retainer to specification in a continuous rotation. Stopping the rotation
during installation will cause the nylon lock to set incorrectly. This will cause incorrect torque readings while tightening the retainer, and
lead to bearing failure. Install a new front axle wheel hub retainer every time after loosening the retainer or not installing the retainer to
specification in a continuous rotation.
Tighten the new nut to specification in a continuous rotation.
14. Check and, if necessary, fill the transaxle to the correct level.