Taurus V6-3.0L DOHC VIN S (2000)
Transmission Speed Sensor: Service and Repair
AX4N Transaxle
Output Shaft Speed (OSS) Sensor
Removal and Installation
1. Disconnect the battery ground cable.
2. Disconnect the Output Shaft Speed (OSS) sensor connector.
3. Rotate the belt tensioner clockwise and remove the drive belt.
4. Raise and support the vehicle.
5. Remove the RH front wheel.
6. Remove the RH front inner fender splash shield.
-
Remove the screws and the pin-type retainers.
