Taurus V6-3.0L VIN 2 Flex Fuel (1997)
35.
NOTE:
Check the heater hose and tube assembly for possible kinks or possible interference with the transmission dipstick and ETA check valve.
Install the new heater hose and tube (assembly includes the coolant by-pass hose) assembly (-18C533-) against the dash panel. Tighten the
retaining screws to 8-10 Nm (6-7 lb-ft). See Figure 13.
36.
NOTE:
The heater return hose has two different size ends. Use the 5/8" end for this step. Install the new screw clamp (389772-S100) on the heater