Taurus V6-3.0L VIN 2 Flex Fuel (1997)
11. Remove both height sensor attachments from front suspension lower arms.
12. Remove rear sub-frame-to-body retaining bolts.
13. Raise twin post hoist carefully until rear sub-frame separates from body approximately 102 mm (4 inches).
14. Remove steering shaft U-joint shield.
15. Remove LH stabilizer bar link.
16. Disconnect power steering pressure switch electrical connectors from power steering auxiliary actuator.
17. Rotate power rack and pinion steering gear to clear bolts from front sub-frame and pull left to ease removal of power steering auxiliary actuator.
18. Remove two actuator-to-steering gear retaining bolts.