Taurus V6-3.0L VIN 2 Flex Fuel (1997)
13. Tighten the screw on the end of the tool using a 3/4 inch box wrench until the seal portion is removed and discard the seal.
INSTALLATION
1. Install LH differential fluid seal using Output Seal Replacer T86P-1177-B.
2. Install RH differential fluid seal using Output Seal Replacer T86P-1177-B with Output Seal Replacer Pilot T94P-77001-JH.
3. Install both halfshsfts into vehicle.
4. Lower vehicle.