Taurus V6-3.0L VIN 2 Flex Fuel (1997)
Accumulator Piston Seals And O-rings Installation
8. Install new seals and O-ring on accumulator pistons.
NOTE: Lube seals and O-ring with a light coating of petroleum jelly.
9. Install accumulator pistons into their proper cylinder.
CAUTION: Do not allow pistons to misalign in their bores. Seal and bore damage may result.
10. Install three accumulator piston shafts.
11. Install new O-ring on connector.
12. Install new connector by pushing into bore from the outside until a click is heard.