ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Antilock Brake System - Lamp ON/DTC's C1165/C1175|Page 7030 > < Vacuum Brake Booster|Removal and Installation|Page 7020
Page 1
background image

Electronic Brake Control Module: Customer Interest
Antilock Brake System - Lamp ON/DTC's C1165/C1175

Article No.
99-5-7

03/22/99

LAMP - ANTI-LOCK BRAKE SYSTEM (ABS) LAMP 
ILLUMINATED - DIAGNOSTIC TROUBLE CODES 
(DTCS) C1165 AND/OR C1175

FORD:
1996 TAURUS

LINCOLN-MERCURY:
1996 SABLE

This TSB article is being republished in its entirety to include the latest level parts.

ISSUE
The Anti-Lock Brake System (ABS) indicator may illuminate on some vehicles. Preliminary investigation will indicate Diagnostic Trouble Code (DTC)
01165 and/or 01175. Pinpoint tests will show no failure. This could be due to moisture entering the ABS module connector, 01057, which causes
electrical shorts and/or corrosion.

ACTION
Add Silicone Brake Caliper Grease and Dielectric Compound to ABS connector C1057, and seal the ABS system ground eyelet by point-soldering the
crimp and applying Silicone Gasket And Sealant to minimize moisture entry into the connector. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

Antilock Brake System - Lamp ON/DTC's C1165/C1175|Page 7030 > < Vacuum Brake Booster|Removal and Installation|Page 7020