Taurus AWD V6-3.5L (2009)
1. NOTE: Module configuration is only required if a new Parking Aid Module (PAM) is being installed.
Upload the PAM configuration information to the scan tool.
Sedan
2. Remove the package tray trim panel.
Wagon
3. Remove the RH C-pillar trim panel.
All vehicles
4. If replacing the parking aid speaker only, proceed as follows:
-
Disconnect the parking aid speaker electrical connector.
-
Disengage the parking aid speaker clips.
-
Remove the parking aid speaker.
5. If replacing the PAM, proceed as follows:
-
Disconnect the electrical connectors.
-
Remove the PAM push pins.
-
Remove the PAM.
6. To install, reverse the removal procedure.
-
Download the configuration information to the PAM.