Taurus AWD V6-3.5L (2009)
Trim Panel: Service and Repair
C-Pillar Trim Panel
C-Pillar Trim Panel - Taurus, Sable
Removal and Installation
1. Remove the rear seat bolster.
2. Remove the C-pillar trim panel screw cover.
3. Remove the C-pillar trim panel screw.
4. Remove the C-pillar trim panel.
-
Pull the forward bottom edge of the lower C-pillar toward the center of the vehicle.
-
Separate the lower C-pillar from the D-pillar trim panel.
-
Position the C-pillar trim panel toward the inside of the vehicle.
-
Separate the C-pillar trim panel from the rear safety belt.
5. NOTICE: To avoid damage to the C-pillar trim panel, remove any retaining clips from the body and attach them to the C-pillar trim
panel before installing.
To install, reverse the removal procedure.